Copy, Move, Rotate, and Scale in One Operation

Use the QuickModify command to copy, move, rotate, and scale entities in one command.

You can modify the basepoint as needed.

To copy, move, rotate, and scale entities in one operation:

1. Click Modify > Quick Modify (or type QuickModify).
2. Type QuickModify at the command prompt.
3. Specify a base point for subsequent modifications.
4. In the graphics area, specify entities to modify.
5. Press Enter.
6. Specify an option:
   • Base. Specify a new base point for subsequent modifications.
   • Copy. Specify one or more destination points to displace copies of the specified entities, then press Enter.

     Use the Base sub-option to specify a new base point in between copying. Specify Exit to finish copying.

   • Move. Specify the destination point.
   • Rotate. Specify the rotation angle.
   • Scale. Specify the scale factor.
   • Undo. Withdraws the last operation.
7. Repeat the previous step to perform more modifications.
8. Specify Exit to end the loop of repeated operations.

Access

Command: QuickModify

Menu: Modify > Quick Modify