Mirroring Entities

Use the Mirror command to copy selected entities onto the opposite side of a specified mirror line. To define the mirror axis, specify two points.

To mirror drawing entities:

1. Click Modify > Mirror (or type Mirror).
2. Do one of the following:
   • On the menu, click Modify > Mirror.
   • Type Mirror.
   • On the toolbar, click and select Mirror .
3. In the graphics area, select entities to mirror.
4. Press Enter.
5. Specify two points to define a mirroring axis.

   To force the mirror line to be parallel to the X- or the Y-axis, enable Ortho mode.

6. At the prompt, press Enter to keep the source entities or specify the Yes option to delete the entities.

   The entities are mirrored about the specified axis.

     

Access

Command: Mirror

Menu: Modify > Mirror

Ribbon: Modify > Mirror

Toolbar: Mirror

Context Menu: Specify entities, right-click in the graphics area, and click Mirror.