Zoom Center

Zoom Center lets you specify a center point for the new view and a magnification value or height.

To use Zoom Center:

1. Type Zoom and specify the Center option.
2. Do one of the following:
   • On the ribbon, click View > Navigate > Zoom Center.
   • On the menu, click View > Zoom > Center.
   • Type Zoom and specify the Center option.
3. Specify a center point.
4. Specify a magnification or height. A smaller value increases the magnification. A larger value decreases the magnification.

  Press Enter to use the default values to re-center the drawing without changing the display scale.

Access

Command: Zoom, option Center

Menu: View > Zoom > Center

Ribbon: View > Navigate > Zoom Center