Editing Geometric Tolerances

Use the EditTolerance command to modify Tolerances.

To edit Tolerances:

1. Click Modify > Entity > Tolerance (or type EditTolerance).
2. Type EditTolerance at the command prompt.
3. In the graphics area, select the Tolerance to edit.
4. In the Geometric Tolerance dialog box, modify the settings.

   For detailled information about the dialog box, see Creating Geometric Tolerances.

5. Click OK.

   The modified Tolerance appears in the graphics area.

6. Click .

   The modified Tolerance appears in the graphics area.

Access

Command: EditTolerance

Menu: Modify > Entity > Tolerance