Command Reference: Commands in Alphabetical Order

#

Command Alias Description Menu
3PointAngleDimension — Creates an angular Dimension based on three points —
4PointAngleDimension — Creates an angular Dimension based on four points —

A

Command Alias Description Menu
About — Displays information about the program Help
About — Displays information about the program Help
About — Displays information about the program Application Menu
ActivateLayer — Activates the Layer of a specified entity Format > Layer Tools
Align AL Aligns entities with other entities in 2D and 3D space —
AngleDimension — Creates an angle Dimension Dimension
Arc A Creates an Arc Draw
ArcLengthDimension — Creates an Arc length Dimension Dimension
AreaBoundary AB Creates a PolyLine or Region entity from an enclosed area (dialog box variant) Draw
-AreaBoundary -BO Creates a PolyLine or Region entity from an enclosed area (command window variant) —
AttachDrawing — Attaches a Referenced drawing to the current drawing Insert
AttachImage — Attaches an image to the current drawing Insert
AttachPDF — Attaches one or multiple pages of a PDF document to your drawing (dialog box variant) Insert
AutoCompleteOptions — Sets options to apply auto-completion of command names and command variable names as you type them (dialog box variant) —
-AutoCompleteOptions — Sets options to apply auto-completion of command names and command variable names as you type them (command window variant) —

 

    ^ Top of Page

B

Command Alias Description Menu
BaselineDimension — Continues a linear, angular, or ordinate Dimension from the baseline of the previous or selected Dimension Dimension
BigFontAlt — Sets an alternate BigFont to use if the original BigFont is not found. —
BlipMode — Enables or disables display of marker blips —
BlockAttributeManager — Manages properties and settings of BlockAttributes in Block definitions —
BlockLibrary — Displays the Block Library palette —
BoxText — Turns boxed text display and print mode on and off —

 

    ^ Top of Page

C

Command Alias Description Menu
Callout — Places boxed mark-up text in the graphics area Draw > Notes and Tables
CCS — Sets, saves, and restores custom coordinate systems (CCS) —
CenterLine — Creates CenterLines between pairs of Lines, Arcs, and PolyLine segments Draw
CenterMark — Creates a center mark or center lines of Circles and Arcs Draw
Chamfer CHA Bevels the edges of drawing entities Modify
Check CHK Evaluates the integrity of a drawing and can correct errors —
Circle C Creates a Circle Draw
CircularPattern — Command window variant of the Pattern command, Circular option —
Clean CL Removes unused named References such as Blocks or Layers from the drawing (dialog box variant) Format
-Clean — Removes unused named References such as Blocks or Layers from the drawing (command window variant) —
ClipboardCopy — Copies entities to the clipboard —
ClipViewport — Clips the display of Viewports on the active Sheet at irregular shapes —
Cloud — Creates revision clouds to indicate that certain areas require or contain revisions (dialog box variant) Draw
CloudField Places a QR code on the current drawing Draw
CloudField — Places a QR code on the current drawing —
CommandWindow — Displays the command prompt area —
ContinueDimension — Continues a linear, angular, or ordinate Dimension from the second extension line of the previous or a selected Dimension Dimension
ConvertPolyLine — Converts lightweight PolyLines to old-format, heavyweight PolyLines and vice versa —
Copy CO Duplicates entities Modify
Copy@ CP@ Copies entities with a specified reference point to the clipboard Edit
CSStyle — Manages custom coordinate systems (CCS) Tools
Cut — Copies entities to the clipboard and deletes the entities —

 

    ^ Top of Page

D

Command Alias Description Menu
Delete DEL Removes entities from the drawing Modify
DeleteLayer — Deletes entities and the layer of selected entities Format > Layer Tools
DeselectAll — Deselects all entities on all currently visible layers —
DetachDrawing — Detaches referenced drawings that were attached to the current drawing —
DetachImage — Detaches referenced images attached to the drawing —
DetachPDF — Detaches PDF Underlays that were attached to the current drawing —
DetachPDF — Detaches PDF Underlays that were attached to the current drawing —
DiameterDimension — Creates diameter Dimensions for Circles and Arcs Dimension
Dimensioning   Click here for Dimensioning Commands
DimensionStyle D Creates and modifies DimensionStyles (dialog box variant) Format
-DimensionStyle — Creates and modifies DimensionStyles (command window variant) Format
DiscardDuplicates — Removes duplicate entities or overlapping parts of entities from the drawing (dialog box variant) —
DisplayCoords — Tracks pointer movements on the status bar —
DisplayFills — Controls fills visibility for wide PolyLines, Solids, Traces, Hatches, and Gradients —
DisplayOrder — Changes the display order of drawing entities and inserted images in the drawings Tools
DraftingStyles — Manages TextStyles, DimensionStyles, RichLineStyles, and TableStyles, and sets styles for use with subsequent commands —
DrawingCompare — Displays the Drawing Compare palette —
DrawingSettings — Sets the behavior of drawing commands, the appearance of certain drawing entities, the unit system of the current drawing, and manages Custom Coordinate Systems (CCSs) —

 

    ^ Top of Page

E

Command Alias Description Menu
EditAnnotation ED Edits items such as single-line Text, Dimension text, Leader annotation, and BlockAttribute definitions —
EditBlockAttribute — Modifies BlockAttributes (dialog box variant) —
-EditBlockAttribute — Modifies BlockAttributes (command window variant) —
EditDimension — Edits Dimension text or Dimension extension lines Dimension > Edit
EditDimensionText — Moves and rotates Dimension text Dimension > Edit
EditEntityGroup — Adds and removes entities to or from EntityGroups, or renames EntityGroups Tools > Entity Groups
EditHatch — Modifies an existing Hatch or Fill (dialog box variant) —
-EditHatch — Modifies an existing Hatch or Fill (command window variant) —
EditIpBlockAttribute — Edits in-place BlockAttribute values —
EditLength — Lengthens or shortens an entity Modify
EditMultiLeader — Adds leader lines to, or removes leader lines from MultiLeaders. Modify > Entity
EditMultiLeader — Adds leader lines to, or removes leader lines from MultiLeaders. —
EditNote — Edits Notes (multiline text) —
EditPolyLine — Edits PolyLines, PolyLine vertices, and 3D PolygonMeshes —
EditRichLine — Edits intersecting and adjoining RichLines, breaks and welds RichLines, and adds or deletes vertices to or from existing RichLines (dialog box variant) —
EditSpline — Modifies the parameters of a specified spline or converts a spline-fit Polyline to a Spline —
EditTable — Changes text in a Table cell —
EditTableCell — Inserts, deletes, merges, or resizes cells, rows, and columns in Tables —
EditTolerance — Modifies Tolerances (datum indicators and basic dimension notation) —
EditVertex — Edits 2D PolyLine vertices Modify
EditXBlockAttribute — Modifies the BlockAttribute values and properties of inserted Blocks —
Ellipse EL Creates an Ellipse or an Elliptical Arc Draw
EnterPoint — Tool for quick entry of drawing coordinates with precision whenever a point is requested —
EntityGroup G Creates a user-defined selection set of entities (dialog box variant) —
-EntityGroup -G Creates a user-defined selection set of entities (command window variant) —
EntityGroupDisplayMode — Sets options for EntityGroup selection —
Explode X Breaks complex objects into their component entities Modify
ExplodeBlockX — Explodes Blocks and converts BlockAttribute values to SimpleNotes Draw > Block
ExplodeText — Converts annotations into Polylines, which represent the text outline —
ExplodeX — Converts Ellipses and Splines into Polylines —
Export EXP Saves entities to other file formats —
ExportBMP — Saves the drawing display to a file in a device-independent bitmap format —
ExportDrawing — Writes entities, Blocks, or the entire drawing to a new drawing file (dialog box variant) —
ExportJPG — Saves specified entities to a JPEG file —
ExportPNG — Saves specified entities to a PNG file (Portable Network Graphics) —
ExportSLD — Stores the current view to a slide file —
ExportSVG — Stores the current view to an SVG file —
Extend EX Extends entities to bounding edges defined by other entities Modify

 

    ^ Top of Page

F

Command Alias Description Menu
Field — Creates Fields for annotations that are used to update information such as modification date, drawing name, and author Draw > Notes and Tables
FillArea — Fills an area with a solid color or color gradient Draw
Fillet F Rounds and fillets the edges of entities Modify
Find — Finds and replaces Text in Notes, Annotations, and Dimension Text Edit
Flip FL Mirrors and deletes the original entity —
FlipArrows — Changes the position of dimension arrows Dimension > Edit
FontAlt — Sets an alternate font to use if the original font is not found —
FreezeLayer — Freezes the Layers of selected entities Format > Layer Tools

 

    ^ Top of Page

G

Command Alias Description Menu
GetArea GA Calculates the area and perimeter of entities or of defined areas Tools > Inquiry
GetDistance — Measures the distance and angle between two points Tools > Inquiry
GetProperties GP Displays information about selected entities Tools > Inquiry
GetXY GXY Displays the coordinate values of a location Tools > Inquiry
Gravity — Determines the size of the EntitySnap target box —
Grid — Turns the grid display on or off and sets other grid options —

 

    ^ Top of Page

H

Command Alias Description Menu
Hatch H Fills a selected boundary with a pattern (dialog box variant) Draw
-Hatch -H Fills a selected boundary with a pattern (command window variant) —
HideBlockLibrary — Hides the BlockLibrary palette —
HideCommandWindow — Hides the command prompt area —
HideDrawingCompare — Hides the Drawing Compare palette —
HideEntities — Hides specified entities —
HideLayer — Turns off the Layer of the selected entity Format > Layer Tools
HideProperties — Hides the Properties palette —
HideView HI Creates a hidden line view —
HorizontalDimension — Creates horizontal linear Dimensions —

 

    ^ Top of Page

I

Command Alias Description Menu
ImportDGN — Inserts content from DGN files (DesiGN files) as Blocks into drawings Insert
InfiniteLine IL Draws an infinite construction line Draw > Line
InsertBlock I Inserts a Block or another drawing (dialog box variant) Insert
-InsertBlock -I Inserts a Block or another drawing (command window variant) —
InsertBlockN — Inserts multiple copies of a Block or Reference in a pattern, arranged in rows and columns Draw > Block
IsolateEntities — Isolates specified entities by hiding all other entities —
IsolateLayer — Isolates the Layers of selected entities Format > Layer Tools

 

    ^ Top of Page

J

Command Alias Description Menu
JoggedDimension JOG Creates jogged radius Dimensions for Circles and Arcs Dimension
JustifyText — Changes the justification of text entities —

 

    ^ Top of Page

L

Command Alias Description Menu
Language — Sets the language to communicate with the software —
Layer LA Controls Layers and Layer properties (dialog box variant) Format
-Layer -LA Controls Layers and Layer properties (command window variant) —
LayerState — Saves, restores, and manages configurations of layer properties and states Format > Layer Tools
Leader LEAD Draws Leader lines which connect annotations to drawing entities Dimension
Line L Creates straight line segments Draw > Line
LinearDimension — Creates a linear Dimension Dimension
LineColor COL Sets the LineColor for new entities (dialog box variant) Format
LineScale — Sets the global LineStyle scale factor —
LineStyle — Creates, loads, and sets LineStyles (dialog box variant) Format
-LineStyle — Creates, loads, and sets LineStyles (command window variant) —
LineWeight LW Sets LineWeight options (dialog box variant) Format
-LineWeight — Sets LineWeight options (command window variant) —
LockLayer — Locks the Layers of selected entities Format > Layer Tools

 

    ^ Top of Page

M

Command Alias Description Menu
MakeBlock B Creates a Block from selected entities (dialog box variant) Draw > Block
-MakeBlock -B Creates a Block from selected entities (command window variant) —
MakeBlockAttribute — Creates a BlockAttribute definition (dialog box variant) Draw > Block
-MakeBlockAttribute — Creates a BlockAttribute definition (command window variant) —
MarkDivisions DIV Places evenly spaced point entities or Blocks along the length or perimeter of an entity Draw > Point
MarkLengths ME Places point entities or Blocks at measured intervals on an entity Draw > Point
Mask — Covers existing entities with a blank area Draw
MatchLayer — Changes the Layer of selected entities to match a destination Layer Format > Layer Tools
Mirror MI Creates a mirror image copy of entities Modify
Model — Toggles from a Sheet tab to the Model tab —
ModelMode MM Toggles from sheet workspace to a model workspace on Sheets —
Modify — Changes the properties of drawing entities —
ModifyProperties — Changes the Layer, LineColor, LineStyle, LineScale, trancparency, and thickness of entities —
Move M Displaces entities a specified distance in a specified direction Modify
MoveDimensionText — Moves Dimension text —
MultiLeader — Creates MultiLeaders based on MultiLeaderStyles Dimension
MultiLeaderStyle — Creates and manages MultiLeaderStyles —
MultiLeaderStyle — Creates and manages MultiLeaderStyles Format

 

    ^ Top of Page

N

Command Alias Description Menu
Note N Creates Text entities (dialog box variant) Draw > Notes and Tables
-Note — Creates Text entities (command window variant) —

 

    ^ Top of Page

O

Command Alias Description Menu
ObliqueDimension — Modifies the orientation of existing linear Dimensions —
Offset O Offsets linear entities in parallel orientation Modify
OpenReference — Opens a Referenced drawing in a new drawing window Tools-
Options OP Configures program operating parameters Tools
OrdinateDimension — Creates ordinate point Dimensions Dimension
Ortho — Constrains the pointer so it moves parallel to the axes of the current coordinate system —
OverrideDimensionStyle — Overrides DimensionStyle variables Dimension > Edit

 

    ^ Top of Page

P

Command Alias Description Menu
PageLayout — Sets print and plot defaults —
Pan P Moves the drawing display in the active ViewTile (dynamic pan) —
-Pan -P Moves the drawing display in the active ViewTile by pointing a displacement View > Pan
PanDown — Pans down —
PanLeft — Pans left —
PanRight — Pans right —
PanUp — Pans up —
ParallelDimension — Creates an aligned linear Dimension Dimension
Paste — Inserts data from the clipboard Edit
PasteAsBlock — Inserts entities from the clipboard as Block Edit
Paste@SourcePosition — Pastes entities from the OS clipboard using the coordinates of the source drawing Edit
PathPattern — Command window variant of the Pattern command, Path option —
Pattern — Creates multiple copies of entities in a pattern (dialog box variant) Modify
-Pattern — Creates multiple copies of entities in a pattern (command window variant) —
PlanView — Sets plan view to construction plane —
Point PO Creates a point entity Draw > Point
PointFormat — Defines the type and size of point entities Format
Polygon POL Creates an equilateral closed PolyLine Draw
PolyLine PL Creates 2D PolyLines Draw > PolyLine
PolyLine3D PL3 Creates a 3D PolyLine of straight line segments in 3D space Draw
PowerTrim — Trims multiple, adjacent entities by dragging the pointer across each entity Modify
Properties PR Displays the Properties palette to change drawing entity properties —
PropertyPainter — Applies properties from one entity to selected entities —

 

    ^ Top of Page

Q

Command Alias Description Menu
QuickGroup — Quickly creates EntityGroups Tools > Enitity Group
QuickModify — Copies, moves, rotates, and scales entities in one operation —
QuickUngroup — Quickly ungroups EntityGroups Tools > Enitity Group

 

    ^ Top of Page

R

Command Alias Description Menu
RadiusDimension — Creates radial Dimensions for Circles and Arcs Dimension
Ray — Draws semi-infinite construction Lines Draw > Line
Rebuild RE Rebuilds the drawing and refreshes the active ViewTile View
RebuildDimension — Updates Dimensions with the active DimensionStyle Dimension > Edit
RebuildField — Manually updates Fields in specified annotations Insert
Rectangle REC Creates a rectangular PolyLine Draw > Rectangle
RedefineBasePoint — Sets a new base point for Blocks —
Redo — Reverses the effects of a previous U or UndoN command Edit
References — Displays the References palette Tools
-References — Controls and manages Referenced drawings —
Region REG Converts an entity enclosing an area into a Region Draw
RelateDimension — Reestablishes the relation of specified Dimensions to entities Dimension > Edit
Rename REN Changes the names of objects (dialog box variant) —
-Rename — Changes the names of objects (command window variant) —
Repeat — Repeats a specified command —
ReplaceDimensionText — Modifies the Dimension text value Dimension > Edit
ResetDimensionText — Undoes the movement of Dimension text Dimension > Edit
RichLine RL Creates RichLines Draw > Line
RichLineStyle RLS Creates and manages RichLineStyles Format
Ring — Creates a filled Circle or Ring Draw
RollView — Controls 3D viewing View
RollViewCenter — Sets the center of rotation for constraint orbit view and starts constraint orbit view —
RollViewContinuous — Rotates the view in 3D space with continuous motion about a specified pivot point View > 3D Orbit
RollViewFree — Rotates the view in 3D space without constraining roll View > 3D Orbit
RollViewHorizontal — Swivels the view in 3D space horizontally (left and right) about an imaginary vertical axis View > 3D Orbit
RollViewVertical — Tilts the view in 3D space vertically (up and down) about an imaginary horizontal axis View > 3D Orbit
Rotate RO Rotates entities about a base point Modify
RotatedDimension — Creates rotated linear Dimensions —
RotateDimensionText — Rotates Dimension text —

 

    ^ Top of Page

S

Command Alias Description Menu
Save — Saves the drawing under the current file name —
SaveAs — Saves a copy of the current drawing under a new name or location File
Scale SC Enlarges or reduces specified entities equally in the X, Y, and Z directions Modify
ScaleText — Enlarges or reduces specified text entities —
Select — Places selected entities in the 'Previous' selection set —
SelectAll — Selects all drawing entities for subsequent modification commands —
SelectionFilter SF Determines a list of requirements that drawing entities must meet to be included in a selection set Tools
SelectMatching — Selects drawing entities of the same type and with shared properties for subsequent commands —
Shade — Shades the drawing model —
ShadeView SHA Determines the ShadeView mode View
Sheet — Create, copy, rename, or delete Sheet tabs (layout mode to set up a printout) —
SheetMode SM Toggles from a model workspace to sheet workspace on Sheets —
ShowLayers — Turns on all Layers Format > Layer Tools
SimpleNote — Creates single line text Draw > Notes and Tables
-SimpleNote — Displays Text on screen you enter it —
SimplePolygon — Creates an equilateral closed PolyLine —
Sketch — Creates freehand lines Draw
SmartDimension — Creates Dimensions with a dimension type determined by the entity selected Dimension
SmartSelect — Creates entity selections based on filtering criteria —
Snap SN Restricts pointer movements and pointing to the drawing to specified intervals —
SpellCheck SP Checks the spelling of Text in the drawing —
Spline — Creates quadratic or cubic Spline (NURBS) curves Draw
Split SPL Deletes parts of entities or splits entities in two Modify
SplitDimension — Splits dimension and extension lines of Dimension entities where they intersect other entities; also joins split dimension and extension lines Dimension
Stretch S Moves or stretches entities Modify
SwitchArea — Switches Between Model and Sheet Tabs —

 

    ^ Top of Page

T

Command Alias Description Menu
Table TB Creates a Table in the drawing (dialog box variant) Table > Notes and Tables
-Table — Creates a Table in the drawing (command window variant) —
TableStyle TS Creates and manages TableStyles Format
TextStyle ST Creates or modifies TextStyles and sets the active TextStyle (dialog box variant) Format
-TextStyle — Creates or modifies TextStyles and sets the active TextStyle (command window variant) —
ThawLayers — Thaws all Layers Format > Layer Tools
ToActiveLayer — Changes the Layers of specified entities to the active Layer Format > Layer Tools
Tolerance TOL Creates Tolerances (datum indicators and basic dimension notation) Dimension
Trace — Draws a Trace Draw
Trapezoid — Creates a trapezoid 2D PolyLine Draw > Rectangle
Trim TR Trims entities at a cutting edge defined by other entities Modify

 

    ^ Top of Page

U

Command Alias Description Menu
U — Reverses the most recent command Edit
Undelete — Restores deleted entities —
UndoLayer — Restores previous Layer settings Format > Layer Tools
UndoN — Reverses the effect of commands —
UnisolateEntities — Shows entities that were hidden with the IsolateEntities or HideEntities commands —
UnisolateLayer — Undoes Layer isolation Format > Layer Tools
UnitSystem UN Sets coordinate and angle display formats and precision (dialog box variant) —
-UnitSystem -UN Sets coordinate and angle display formats and precision (command window variant) —
UnlockLayer — Unlocks locked Layers Format > Layer Tools
UnrelateDimension — Dissolves the relation of specified Dimensions to entities —
UpdateBlockAttributes — Updates all instances of Blocks in the drawing with new or modified BlockAttributes —

 

    ^ Top of Page

V

Command Alias Description Menu
VerifyDimensions — Verifies all measurements of related Dimensions in the drawing Dimension
VerticalDimension — Creates vertical linear Dimensions —
VersionHistory — Displays the Manage versions palette —
ViewDirection — Sets the viewing direction for a 3D view of the drawing —
Viewport — Creates and controls Viewports on Sheet tabs —
-Viewport — Creates and controls single or multiple Model ViewTiles or Sheet Viewports (command window variant) —
ViewportLayer — Controls Layer visibility in Viewports on Sheets —
Views V Saves, restores and manages user-defined model and Sheet views, and preset views (dialog box variant) View
-Views -V Saves, restores and manages user-defined model and Sheet views, and preset views (command window variant) —
ViewTiles — Creates and controls single or multiple Model ViewTiles or Sheet Viewports (dialog box variant) View > View Tiles

 

    ^ Top of Page

W

Command Alias Description Menu
Weld — Joins two entities into a single entity Modify

 

    ^ Top of Page

Z

Command Alias Description Menu
Zoom Z Increases or decreases the visible part of the drawing  View
ZoomBack ZB Zooms to previous view —
ZoomDynamic ZD Zooms the drawing at realtime (dynamic zoom) —
ZoomFactor ZFA Zooms by a factor —
ZoomFit ZF Zooms to the drawing extents View > Zoom
ZoomIn ZI Zooms in to the drawing —
ZoomOut ZO Zooms out from the drawing —
ZoomWindow ZW Zooms to a region of the drawing specified by a box View > Zoom
ZPlane — Sets elevation and thickness of new drawing entities —

 

    ^ Top of Page

DIMENSIONING COMMANDS

Command Alias Description Menu
3PointAngleDimension — Creates an angular Dimension based on three points —
4PointAngleDimension — Creates an angular Dimension based on four points —
AngleDimension — Creates an angle Dimension Dimension
ArcLengthDimension — Creates an arc length Dimension Dimension
BaselineDimension — Continues a linear, angular, or ordinate Dimension from the baseline of the previous or specified Dimension Dimension
CenterMark — Creates a center mark or center lines for Circles and Arcs Dimension
ContinueDimension — Continues a linear, angular, or ordinate Dimension from the second extension line of the previous or a specified Dimension Dimension
DiameterDimension — Creates diameter Dimensions for Circles and Arcs Dimension
DimensionStyle — Creates and modifies DimensionStyles (dialog box variant) Format
EditDimension — Edits Dimension text or Dimension extension lines Dimension > Edit
EditDimensionText — Moves and rotates Dimension text Dimension > Edit
EditMultiLeader Adds leader lines to, or removes leader lines from MultiLeaders Modify > Entity
FlipArrows — Changes the position of dimension arrows Dimension > Edit
HorizontalDimension — Creates horizontal linear Dimensions —
JoggedDimension — Creates jogged radius Dimensions for Circles and Arcs Dimension
Leader — Draws Leader lines which connect annotations to drawing entities Draw > Notes and Tables
LinearDimension — Creates a linear Dimension Dimension
MoveDimensionText — Moves Dimension text —
MultiLeader — Creates MultiLeaders based on MultiLeaderStyles Dimension
MultiLeaderStyle — Creates and manages MultiLeaderStyles —
MultiLeaderStyle — Creates and manages MultiLeaderStyles Format
ObliqueDimension — Modifies the orientation of existing linear Dimensions —
OrdinateDimension — Creates ordinate point Dimensions Dimension
OverrideDimensionStyle — Overrides DimensionStyle variables Dimension > Edit
ParallelDimension — Creates an aligned linear Dimension Dimension
RadiusDimension — Creates radial Dimensions for Circles and Arcs Dimension
RebuildDimension — Updates Dimensions with the active DimensionStyle Dimension > Edit
RelateDimension — Reestablishes the relation of specified Dimensions to entities Dimension > Edit
ReplaceDimensionText — Modifies Dimension text value Dimension > Edit
ResetDimensionText — Undoes the movement of Dimension text Dimension > Edit
RotatedDimension — Creates rotated linear Dimensions —
RotateDimensionText — Rotates Dimension text —
SmartDimension — Creates Dimensions with a dimension type determined by the entity selected Dimension
UnrelateDimension — Dissolves the relation of specified Dimensions to entities —
VerifyDimensions — Verifies all measurements of related Dimensions in the drawing Dimension
VerticalDimension — Creates vertical linear Dimensions —

 

    ^ Top of Page